St Kilda, Melbourne

Five levels in a Matt Gibson home

Our Australian sister company Lift Shop installed a 5-level home elevator in St Kilda, in a home designed by Matt Gibson Architecture + Design. It travels more than 41 ft and stops on every floor.

Matt Gibson designed this St Kilda house as a home for three generations, with stacked glass volumes above a street-level commercial tenancy. It is an adaptable model for city living on a narrow site. Building tall means many levels, and a family of every age needs to reach all of them, so an elevator was part of the design from day one.

The elevator
LocationSt Kilda, Melbourne
Levels5
Travel41 ft 6 in (12,640 mm)
Speed98 fpm (0.50 m/s)
Cabin47.2 x 47.2 in (1200 x 1200 mm)
DoorsSliding, powder-coated steel
FinishesSkinplate side walls, full rear mirror, stainless ceiling and handrail
Installed2015
Project credits
ArchitectMatt Gibson Architecture + Design
AgentMarshall White

The tour reaches the elevator at 3:51.

An architect's home, built tall

Matt Gibson is one of Melbourne's best-known residential architects. This St Kilda home stacks five levels on its site, close to the beach and the city.

With five floors, stairs alone would turn the house into a climb. The elevator makes every level part of daily life.

5Levels
41 ftTravel
1,390 lbsCapacity
2015Installed

Inside the home

Photography: The Local Project / Matt Gibson Architecture + Design. Video stills: Marshall White.

The elevator

Forty-one feet, five stops

At 41 ft 6 in, this is a tall ride for any home. The electric traction drive moves at 98 fpm, so the trip from bottom to top stays quick. The cabin carries 1,390 lbs.

Inside, Skinplate side walls meet a full mirror on the rear wall. The ceiling, profiles and handrail are stainless, with LED lighting.

DriveElectric traction, 98 fpm
Landing doorsSliding steel, x5
Cabin wallsSkinplate with full rear mirror
MachineControl cabinet on level 4

Sliding doors on every floor

Powder-coated steel sliding doors serve all five landings. The control cabinet sits on level four, so no machine room was needed.

More than a decade after installation, the elevator still carries the house.

Why it works

Five floors, one ride

The elevator stops on every level of a tall city home.

Quick at height

98 fpm keeps a 41 ft trip short.

No machine room

The control cabinet tucks into level four.

This home was completed by Lift Shop, the Australian sister company of Elevator Boutique. The same range is available in California through our Fountain Valley showroom.

Explore the A Series, the E Series and more homes we have finished.

Why Elevator Boutique

Custom built. Every time.

Elevator Boutique and our sister company Lift Shop have installed more than 12,000 home elevators across Australia and California. Every one is built in Italy and made to measure for the home it serves, from the cabin size to the last finish.

12,000+ installsAcross Australia and California, in homes like this one.
3-year warrantyStandard on every Elevator Boutique elevator.
Custom Italian finishesThe most extensive range of Italian cabin finishes, from brushed bronze to real glass.
Made for the homeCabin size, doors, walls and lighting tailored to every floor plan.
Glass-door home elevator beside a sweeping staircase and patterned stone floor

See it in person

The only way to judge an elevator is to stand in one. Ride the A Series and E Series at our Fountain Valley showroom, appointment only.

Download Brochure Luxury Home Elevator Guide